Northwest Well & Septic WA · OR · ID directory

Home · Guides

Iron and manganese in well water

How official EPA and Washington Department of Health publications describe iron and manganese in drinking water — the aesthetic (secondary) numbers, the clues in color and taste, and, for manganese, the health-advisory figures DOH now publishes for public water systems. Treatment should follow a laboratory result. This is not medical advice.

Sources last checked November 18, 2026 (America/Los_Angeles).

What it can look and taste like

DOH publication 331-286, Color, taste and odor problems in drinking water (revised February 2018), is written for people on public supplies and on private wells. It says a sudden color change can indicate a public-health concern and tells private-well owners to contact the local health agency. On common colors and tastes, it states:

EPA’s private-well testing chart similarly says stained plumbing fixtures or laundry are a reason to test for iron, copper, and manganese. Color alone is not a laboratory result.

Published numbers

EPA’s secondary drinking-water standards — guidelines for nuisance chemicals, not federally enforced primary health standards — list:

Those secondary maximum contaminant levels (SMCLs) apply as guidelines for public water systems. They are not a private-well legal limit. DOH publication 331-597, written as guidance for local government, describes iron and manganese as naturally occurring inorganic contaminants that are “non-acute” / “secondary” (aesthetic) concerns, and recommends initial sampling especially where they have previously been found in groundwater.

This page does not invent a separate private-well numeric standard. Use the laboratory result, the published aesthetic numbers, and advice from the local health department to decide whether treatment is only for staining or taste, or whether another contaminant must be addressed first.

Manganese health advice from DOH

For many years, DOH notes, manganese in drinking water was treated mainly as an aesthetic concern. In December 2023 the Office of Drinking Water revised its recommendations for public water systems in publications 331-740 (for customers) and 331-741 (for system managers), citing studies of health effects at high levels. Those publications are written for public-system customers and managers. They are quoted here because they are the state’s current official manganese advice; they are not a new private-well regulation.

DOH’s customer publication states:

The same publications also list EPA’s 2004 health-advisory figures: 0.3 mg/L as a 10-day advisory for infants under 6 months and as a lifetime advisory for the general population, and 1.0 mg/L as a 10-day advisory for children 6 months and older and for adults. For public water systems, DOH recommends source treatment when source manganese is greater than 0.05 mg/L, a treated-water goal of 0.02 mg/L or less at the entry point to the distribution system, and public notification when distribution levels are 0.3 mg/L or greater. Those operating recommendations are aimed at water systems, not at a mandate for every private well.

Test first

Use a laboratory accredited for the tests you need. Ecology’s Lab Search can be filtered by analyte. Annual coliform and nitrate tests, recommended by DOH for every private well, are a separate question from iron and manganese; a filter aimed at staining is not a substitute for those tests. If a water softener is under consideration, EPA’s private-well chart says to test manganese and iron as well as hardness. See Testing and treating well water and Hardness and softeners.

Treatment after you have results

The right device depends on the form and concentration of iron and manganese, and on the rest of the water chemistry. DOH’s Group B Water System Design Guide (331-467) describes common public-system strategies for iron and manganese removal as oxidation and filtration, ion exchange, and sequestering; that guide is written for small public water systems, not as a product endorsement for a household. 331-740 notes that manganese in source water is often dissolved, and that it can oxidize and precipitate in tanks and pipes, so the mix of dissolved and precipitated manganese can vary from house to house — one reason public-system guidance prefers treatment at the source over relying only on a device at a single tap. After any treatment is installed, follow the manufacturer’s maintenance instructions and re-test to confirm performance. This site does not publish a water-treatment installer roster, because no official statewide roster was found.

Affiliate placeholders (SpringWell and Aquasana)

If a laboratory result shows a treatment need, some households consider whole-house (point-of-entry) or single-tap (point-of-use) equipment. This site intends to use clearly marked affiliate links for SpringWell and Aquasana once tracked referral URLs exist. Those links are not in place yet, and nothing on this page is a finding that a particular product is appropriate for your lab result.

SpringWell Water affiliate link TODO — official program page (for reference, not a tracked link): springwellwater.com/affiliate-program.

Aquasana affiliate link TODO — official program page (for reference, not a tracked link): aquasana.com/affiliate-program.html.

Do not treat those official program pages as shopping or referral links from this site. See the affiliate disclosure for commission language taken from those program pages. This directory will not invent reviews or “best” rankings to sell a filter.

Gaps

Sources