Septic systems and high winter water tables on the Washington coast
Why a shallow winter water table changes what kind of on-site sewage system can be approved, what state rule requires for site evaluation and a reserve drainfield, and how Pacific County describes that constraint in its own published table. This page does not invent installation prices.
Why the winter water table matters
An on-site sewage system (OSS) treats wastewater in the soil beneath the drainfield. That soil needs enough unsaturated depth to do the work. Washington rule calls that depth vertical separation. WAC 246-272A-0010 defines it as “the depth of suitable soils between the bottom infiltrative surface of a soil dispersal component and the highest seasonal water table, a restrictive layer, or soil type 7.” A “restrictive layer,” in the same section, is a stratum that impedes the vertical movement of water, air, and plant roots — including hardpan, claypan, some compacted soils, and bedrock. “Water table” means the upper surface of the groundwater, whether permanent or seasonal.
On the Washington coast, the highest seasonal water table is often a winter condition. If a design is based on a late-summer observation only, it can miss the water table that actually controls the site. That is why state rule allows the local health officer to require measurements during months of probable high-water-table conditions.
Site evaluation and reserve area
WAC 246-272A-0220 (Code Reviser PDF certified 4/9/2025; section effective 4/1/2025) says only professional engineers, designers, or local health officers may perform soil and site evaluations; soil scientists may perform soil evaluations only. The person evaluating the site must report a sufficient number of soil logs in both the initial soil-dispersal component and the reserve area, and must report groundwater conditions, the date of the observation, and the “probable maximum height.”
The property owner or the owner’s agent must prepare soil-log excavations that allow the soil profile to be examined to a depth three feet deeper than the anticipated infiltrative surface — or shallower if a water table or restrictive layer is encountered. The local health officer:
- Shall render a decision on the height of the water table within 12 months of receiving the application, under precipitation conditions typical for the region.
- May require water-table measurements during months of probable high-water-table conditions if there is not enough information to determine the highest seasonal water table.
- May require another evaluation if the site has been altered since the first one was submitted.
A reserve area, under WAC 246-272A-0010, is “an area of land approved for the installation of a conforming OSS that is protected and maintained for replacement of the OSS upon its failure.” WAC 246-272A-0234 requires both the primary and reserve areas to be sized at least 100 percent of the approved loading rates. WAC 246-272A-0230 allows the local health officer to approve a reserve-area design that is different from the initial system, if both designs meet the requirements for new construction. Drainage from roofs, footing drains, and other non-sewage drains must be kept out of the OSS and the reserve area.
Soil is classified into types 1 through 7 in Table V of WAC 246-272A-0220. Type 7 soils are described as unsuitable for treatment or dispersal (for example, sandy clay, clay, strongly cemented or firm soils, soils with a massive structure, or soils with appreciable expanding clays). The coarsest textured soil within the vertical separation selected by the designer determines the minimum treatment level and method of distribution (WAC 246-272A-0230).
State treatment levels and vertical separation
WAC 246-272A-0230 matches treatment-component performance levels and the method of distribution to vertical separation and soil type. The table below is transcribed from Table VI of that section (footnotes on the official table refer to product-testing requirements in WAC 246-272A-0110). It is a design rule, not a permit for any particular lot. The table starts at 12 inches of vertical separation; it does not list a conforming option below that.
| Vertical separation (inches) | Soil type 1 | Soil type 2 | Soil types 3–6 |
|---|---|---|---|
| 12 to less than 18 | A and BL1 — pressure with timed dosing | B and BL2 — pressure with timed dosing | B and BL2 — pressure with timed dosing |
| 18 to less than 24 | B and BL2 — pressure with timed dosing | C and BL3 — pressure with timed dosing | C and BL3 — pressure with timed dosing |
| 24 to less than 36 | B and BL2 — pressure with timed dosing | C and BL3 — pressure with timed dosing | E — pressure with timed dosing |
| 36 to less than 60 | B and BL2 — pressure with timed dosing | E — pressure | E — gravity |
| 60 or more | C and BL2 — pressure | E — gravity | E — gravity |
The same section says disinfection may not be used to achieve BL1 or BL2 in type 1 soils, or to achieve BL3. Local health officers shall not approve designs for cesspools or seepage pits. Smaller vertical separations generally require a higher treatment level and pressure distribution with timed dosing — often a sand filter, mound, or other enhanced treatment system, as described in a local health department’s published guidance. This page does not assign a product name or a bid price to those systems.
Pacific County’s published screening table
Pacific County’s Department of Community Development septic page uses “distance from the surface of the ground to the restrictive layer (winter water table, hardpan, solid clay)” as its main published screening factor, and states that the type of system you can install depends on soil texture, soil structure, and horizontal and vertical distances to the water table, wetlands, and open water. The county’s general types, as published on that page (not a permit decision), are:
| Distance to restrictive layer | General type of system, as published by the county |
|---|---|
| Less than 12 inches | None |
| 12 to 18 inches | ATU or sand filter with a mound or other enhanced treatment system |
| 18 to 30 inches | Sand filter or a mound or other enhanced treatment system |
| 30 to 42 inches (silt/clay soils) | Pressure |
| 30 to 72 inches (sandy soils) | Pressure |
| Greater than 42 inches (silt/clay soils) | Gravity |
| Greater than 72 inches (sandy soils) | Gravity |
That local table is consistent with the state rule in an important way: below 12 inches to the restrictive layer, the county publishes “None,” and state Table VI does not list a conforming option below 12 inches of vertical separation. The inch breaks above 18 inches are not identical to Table VI, because the county is describing system types in local terms, not restating the state performance-level table. Always use the design prepared for the parcel and the permit issued by the county. Listings of Pacific County designers, engineers, installers, inspectors, and pumpers are on the Pacific County directory.
Neighboring coastal counties apply the same state chapter, with local procedures. Lewis County’s current certified-professional lists are on the Lewis County directory. Grays Harbor County permit contacts are on the Grays Harbor County page.
Who may design and install
WAC 246-272A-0230 requires an OSS to be designed by a professional engineer licensed under chapter 18.43 RCW or an OSS designer licensed under chapter 18.210 RCW, except that a local health officer may, at the officer’s discretion, allow a resident owner of a single-family residence not within 200 feet of a marine shoreline to design an OSS for that residence, and a health officer who performs the soil and site evaluation may design the OSS. Confirm current designer and PE licenses with the Department of Licensing or BRPELS. In Washington, installers and pumpers are approved locally; use the county list if one exists, then verify that approval is still current. See also DOH’s page on hiring a septic-system professional.
Gaps
- No official bid range or typical install cost for mounds, sand filters, or ATUs was found on the state or Pacific County pages used here. This page does not invent one.
- This is not a complete design manual. Product performance levels, tank sizing, and horizontal setbacks appear in other sections of chapter 246-272A WAC and in local code.
- Wahkiakum County’s official website could not be retrieved on November 18, 2026, so no Wahkiakum roster or local water-table table is included here.
Sources
- WAC 246-272A-0010, -0220, -0230, and -0234 (Code Reviser PDFs certified 4/9/2025; current OSS rule language effective 4/1/2025, WSR 24-06-046).
- Pacific County DCD, Septic page, including the published distance-to-restrictive-layer table (retrieved November 18, 2026).
- DOH, Septic System and Hiring a Septic System Professional.