Testing and treating well water
What Washington’s health department recommends private well owners test for, how to read the published health-based numbers for nitrate and arsenic, and why treatment should follow a laboratory result — not a product advertisement.
What to test, and how often
If you own a private well, you are responsible for testing your own water. DOH’s current “Testing Your Water” page recommends testing every year for coliform bacteria and nitrate, because those contaminants “rapidly could affect a person’s health—possibly even with just one drink of water.” If the nitrate result is 5 mg/L or higher, DOH says you may want to re-test in six months.
For arsenic, the same page suggests testing at least twice while you own the well, “once in summer and again in winter,” to check seasonal influences. DOH’s “Arsenic and Your Private Well” page is more specific about timing: test once in the late summer and once again in the early spring. This site reports both phrasings as published; either way, one sample is not enough to rule out a seasonal change.
DOH publication 331-349 also lists extra times to test for coliform (an unexplained household illness, a neighbor’s contaminated well or failing septic system, a change in the water’s appearance, taste, or smell, a well-system repair, or flooding) and for nitrate (an infant under 12 months in the home, pregnancy or nursing, or fertilizer use near the well). When you buy or sell a home with a private well, the county or a lender may require sampling results; ask the local health department what is required.
DOH publication 331-597, written as guidance for local government, additionally recommends initial sampling for arsenic, iron, and manganese where those contaminants are known or suspected, and initial chloride testing for wells near salt water because of possible seawater intrusion. That publication is guidance to local agencies, not a private-well legal mandate. A current DOH private-well publication focused on hardness was not found in this pass, so this page does not invent a hardness standard.
Choosing an accredited lab
Use a laboratory accredited for the tests you need. Ecology’s Lab Search can be filtered by analyte or location. DOH publication 331-798 (dated 3/27/2026) lists certified nitrate and coliform labs by county and states that prices for those tests “range from $21–$55 depending on the lab.” Older DOH pages still mention other historic price ranges (the live testing page still says “The 2010 costs generally range from $25 to $50 per test”; 331-349, dated April 2019, says “The 2019 costs generally range from $20-$40 per test”). Treat those figures as dated published ranges, not a current quote. Confirm today’s fee, bottle type, and hold time with the lab before you sample. County lab listings on this site include Pacific County, Lewis County, Grays Harbor County, Cowlitz County, and nearby labs on the Mason County page.
Coliform bacteria
Coliform is an annual recommended test because it can affect health quickly. If coliform is present, 331-349 says you may need to fix the problem by disinfecting the well, installing treatment, or repairing piping, and it tells readers to contact the local health department for advice. A filter marketed for taste or sediment is not a substitute for finding the source of contamination and confirming, with a follow-up lab test, that the water is no longer positive. Follow the sampling instructions from the laboratory you use. Official disinfection procedures, including DOH publication 331-242, are summarized in Bacteria in well water and disinfection.
Nitrate
The drinking-water quality standard for nitrate, measured as nitrogen, is 10 mg/L for public water systems, as stated on DOH’s nitrate page. Publication 331-349 tells private-well owners to contact the local health department if nitrate exceeds 10 mg/L and notes that “the concern is for infants younger than 12 months.” Infants and pregnant women “should not drink the water until the well has a treatment system that provides continuous water quality below the health standard.”
DOH’s nitrate page also states: “Do not drink water with nitrate levels above 10 mg/L if you are pregnant or trying to become pregnant.” And: “Do not give babies younger than 12 months drinking water with nitrate levels above 10 mg/L.” Important: “Do not boil your well water if it contains high levels of nitrate. While boiling water kills bacteria, it may increase the nitrate level in the water because nitrate won’t evaporate with the boiled water.”
Arsenic
Arsenic occurs naturally in some Washington groundwater. Testing is the only way to know how much is in a well. DOH recommends that water used for drinking or food preparation contain no more than 10 parts per billion (ppb) arsenic, which is the same as 0.01 mg/L and is the federal public-system standard. DOH notes there is no statewide standard that automatically applies to private wells, though a few counties have local rules; where there are no county rules, “it is up to each private well owner to decide whether he or she wants to take steps to reduce the levels.”
On “Arsenic and Your Private Well,” DOH also publishes these recommendations:
- If the water contains between 10 ppb and 50 ppb, do not drink it or use it for food preparation over the long term.
- If it contains more than 50 ppb, stop using it immediately for drinking and food preparation.
- Because arsenic does not pass through skin easily and does not easily evaporate, DOH says it is okay to bathe and clean with the water unless it contains more than 500 ppb; above 500 ppb, call the local health department or DOH for advice before choosing an option.
A longer standalone guide is at Arsenic in well water. Options described by DOH include bottled water (ask the supplier about impurities, including arsenic) and home treatment systems that use reverse osmosis, distillation, or special filtration material. DOH warns that many filters that improve taste or odor “do not remove arsenic.” Point-of-entry (whole-house) equipment treats all water used in the house; point-of-use equipment treats a single tap. After installation and routine maintenance, the water should be tested again to ensure the system is removing arsenic. DOH recommends equipment certified by NSF International.
Iron, manganese, and coastal chloride
DOH publication 331-597 describes iron and manganese as naturally occurring inorganic contaminants that are “non-acute” / “secondary” (aesthetic) concerns, and recommends initial sampling especially where their presence has previously been found in groundwater. For wells located near salt water, the same guidance recommends initial testing for chloride because of possible seawater intrusion. Standalone guides now collect the published EPA secondary numbers and DOH manganese health-advisory figures: Iron and manganese in well water and Hardness and softeners. A current official DOH private-well publication focused on hardness was still not found, so this site does not invent a hardness standard.
Treatment after you have results
Test first. The right device depends on the contaminant, the concentration, and the chemistry of the well. A softener or a carbon filter that helps with one aesthetic problem may not address nitrate, arsenic, or bacteria. DOH’s arsenic page is explicit that some popular filters do not remove arsenic, and that treatment performance depends on water quality and maintenance. The nitrate page is explicit that boiling is the wrong response to high nitrate.
If treatment is used, plan for upkeep and for follow-up lab tests. 331-597 advises local agencies that any system relying on treatment depends on proper operation and ongoing monitoring. This site will not invent an installer roster for water-treatment contractors; confirm any installer the same way you would confirm other licensed work, and keep the laboratory in the loop.
Affiliate placeholders (SpringWell and Aquasana)
If a laboratory result shows a treatment need, some households consider whole-house (point-of-entry) or single-tap (point-of-use) equipment. This site intends to use clearly marked affiliate links for SpringWell and Aquasana once tracked referral URLs exist. Those links are not in place yet, and nothing on this page is a finding that a particular product is appropriate for your lab result.
SpringWell Water affiliate link TODO — official program page (for reference, not a tracked link): springwellwater.com/affiliate-program.
Aquasana affiliate link TODO — official program page (for reference, not a tracked link): aquasana.com/affiliate-program.html.
Do not treat those official program pages as shopping or referral links from this site. See the affiliate disclosure for commission language taken from those program pages. This directory will not invent reviews or “best” rankings to sell a filter.
Gaps
- A current official DOH private-well publication on hardness was not found in this research pass.
- DOH publication 334-156 (“Arsenic and your private well”) was referenced from 331-597, but the legacy PDF URL returned HTTP 404 on November 18, 2026; the current HTML page of the same title was used instead.
- Tracked SpringWell and Aquasana affiliate URLs do not yet exist on this site.
- This page does not list water-treatment installers, because no official statewide installer roster was found.
Sources
- DOH, Testing Your Water.
- DOH publication 331-349, Private Wells: Information for Owners (April 2019).
- DOH publication 331-798, Nitrate and Coliform Testing Labs (3/27/2026).
- DOH publication 331-597, Guidance for Local Government (initial sampling recommendations).
- DOH, Arsenic and Your Private Well and Arsenic.
- DOH, Nitrate.
- Ecology, Lab Search.